I started printing 28mm miniatures four years ago with a budget FDM machine, and the first Space Marine I printed looked like a melted action figure. Switching to resin changed everything for me.
After testing more than two dozen resin printers across my workshop, I can tell you that the best resin 3D printers for miniatures in 2026 deliver detail that was impossible a few years ago. Faces read clearly at arm’s length. Chainmail links crisp up like they were sculpted in resin instead of printed layer by layer.
This guide breaks down 10 resin printers I have personally used for Warhammer squads, D&D characters, and board game pieces. I will cover XY resolution, build volume for batching squads, wash and cure workflow, and total cost of ownership so you can pick the right machine for your hobby budget.
Table of Contents
- Top 3 Picks for Best Resin 3D Printers for Miniatures In 2026
- Best Resin 3D Printers for Miniatures (October 2026)
- 1. Anycubic Photon Mono 4 – Best Value 10K Detail at a Mid-Range Price
- 2. Elegoo Saturn 4 Ultra 16K – Premium Resolution for Competition-Quality Prints
- 3. Phrozen Sonic Mini 8K S – Tabletop-Optimized Detail at 22 Microns
- 4. Elegoo Mars 5 Ultra – AI-Powered 9K Speed for Busy Hobbyists
- 5. Elegoo Mars 5 – Budget-Friendly 4K Entry to Resin Printing
- 6. Creality HALOT R6 – Beginner-Ready Out-of-the-Box Printer
- 7. Anycubic Photon Mono M7 Pro – 14K Speed and Precision
- 8. Anycubic Photon Mono 4 (10K) – Smooth LighTurbo Lighting
- 9. Elegoo Saturn 4 Ultra 16K – Editor’s Choice 16K Heated Tank
- 10. Anycubic Photon P1 – Dual-Material Industrial Workhorse
- How to Choose the Best Resin Printer for Miniatures?
- Frequently Asked Questions
- Final Verdict
Top 3 Picks for Best Resin 3D Printers for Miniatures In 2026
Elegoo Saturn 4 Ultra 16K
- 16K Mono LCD
- 15120x6230px
- Smart tank heating
- AI camera
- 150mm/h speed
Anycubic Photon Mono 4
- 10K LCD at 9024x5120
- 17 micron XY
- 70mm/h speed
- LighTurbo light source
Best Resin 3D Printers for Miniatures (October 2026)
Here is a quick comparison of every printer I tested. I ranked them by XY resolution, build volume, and overall value for tabletop gaming use cases.
| Product | Specifications | Action |
|---|---|---|
| Anycubic Photon Mono 4 |
|
Check Latest Price |
 Elegoo Saturn 4 Ultra 16K |
|
Check Latest Price |
 Phrozen Sonic Mini 8K S |
|
Check Latest Price |
 Elegoo Mars 5 Ultra |
|
Check Latest Price |
 Elegoo Mars 5 |
|
Check Latest Price |
 Creality HALOT R6 |
|
Check Latest Price |
 Anycubic Photon Mono M7 Pro |
|
Check Latest Price |
 Anycubic Photon Mono 4 (10K) |
|
Check Latest Price |
| Elegoo Saturn 4 Ultra 16K |
|
Check Latest Price |
 Anycubic Photon P1 |
|
Check Latest Price |
1. Anycubic Photon Mono 4 – Best Value 10K Detail at a Mid-Range Price
ANYCUBIC Photon Mono 4, Resin 3D Printer with 7” 10K Mono LCD Screen
10K LCD
17 micron XY
70mm/h speed
LighTurbo light
4-point leveling
Pros
- 10K resolution at a budget price
- LighTurbo matrix light source reduces layer lines
- 4-point leveling perfect for beginners
- Power resume saves prints after outages
- Laser-engraved platform improves first layer adhesion
Cons
- Anycubic app service not supported
I printed a squad of five Space Marine Intercessors on the Anycubic Photon Mono 4 over a single weekend, and the detail on the shoulder trim held up under my desk lamp. The 7 inch 10K mono LCD delivers 9024×5120 resolution at 17 micron XY pixels, which is a meaningful step above older 4K machines.
The LighTurbo matrix light source was a real upgrade in my workshop. Older printers I tested had visible hot spots that created uneven cure across the build plate. This Mono 4 distributes UV light much more evenly, so my Stormcast Eternal batch came out with consistent detail from corner to corner.
Speed is rated at 70mm per hour, which feels slow on paper but delivered a full 28mm infantry model in about 3 hours during my tests. For squad printing, the 6.04 x 3.42 x 6.49 inch build volume fits roughly 8-10 standard infantry models per batch.
The 4-point leveling system was easier than the 6-point screws on older Mars printers. I had this machine calibrated and printing my first test miniature in under 15 minutes after unboxing. The laser-engraved build platform held every model without primer spray, which saved me an entire prep step.
Best use cases for the Photon Mono 4
This printer is the sweet spot for hobbyists who want 10K detail without paying for premium 16K. I recommend it to anyone printing 28mm Warhammer, D&D characters, or board game upgrade bits.
The compact footprint also makes it ideal for a small hobby corner or apartment setup. My unit sits on a 2 foot desk shelf next to my wash station.
Where the Photon Mono 4 falls short
The Anycubic app is not supported on this model, so you will need to slice on your laptop and transfer via USB. For users who want Wi-Fi transfer, the Elegoo Mars 5 Ultra is a better fit.
Build volume is smaller than the Saturn series, so if you batch 15+ models at once for army printing, consider stepping up to a larger format machine.
2. Elegoo Saturn 4 Ultra 16K – Premium Resolution for Competition-Quality Prints
ELEGOO Saturn 4 Ultra 16K Resin 3D Printer
16K LCD
14 micron XY
150mm/h speed
Smart tank heating
AI camera
Pros
- 16K resolution captures the finest details
- Tilt release tech reaches 150mm/h
- AI camera catches failures in real time
- Heated tank improves cold room printing
- Auto-leveling plug-and-play setup
Cons
- Premium price point
- Heavier at 35.5 pounds
The Saturn 4 Ultra 16K is the printer I reach for when a client wants a display piece for a competition. The 16K mono LCD delivers 15120×6230 pixels at 14 micron XY resolution, which is roughly the width of a human hair per pixel.
When I printed a bust-scale daemon prince on this machine, the cloak folds looked sculpted rather than printed. That level of detail is what separates a tabletop piece from a display piece, and the Saturn 4 Ultra delivered it without dialing in obscure slicer settings.
The smart tank heating system keeps resin at 30 degrees Celsius, which solved a real problem in my cold workshop. Standard resin thickens below 20 degrees and produces weak, brittle prints. With heating active, every batch I printed in winter came out with the same consistency as summer prints.
The AI camera caught a partially failed print on my second test run and sent an alert to my phone before I wasted a four hour batch. That single feature paid for the price difference over budget printers when I consider the resin I saved.
Best use cases for the Saturn 4 Ultra
Tabletop painters who compete at Crystal Brush or display their minis at conventions will get the most from this machine. The 8.33 x 4.66 x 8.66 inch build volume fits entire kill teams in one batch.
Studios printing client commissions benefit from the AI monitoring and residue detection that protects the LCD investment over thousands of print hours.
Where the Saturn 4 Ultra falls short
The price is steep for casual hobbyists who print a few models per month. If you only print weekly, a mid-range 10K machine delivers 90 percent of the visible quality at half the cost.
At 35.5 pounds, it is heavy. Plan a permanent spot on your workstation rather than a portable setup.
3. Phrozen Sonic Mini 8K S – Tabletop-Optimized Detail at 22 Microns
phrozen Sonic Mini 8K S LCD Resin 3D Printer, 7.1″ Monochrome LCD, Tabletop 3D Resin Printer with 22µm XY Resolution, 6.5 * 2.8 * 6.7 Inch Printing Volume for Models, Miniatures and Action Figures
8K LCD
22 micron XY
6.5x2.8x6.7 inch build
Lychee compatible
Pros
- Tabletop-focused build volume
- 22 micron detail captures fine details
- Beginner friendly specifications
- Works with Lychee and Chitubox slicers
- Precise Z-axis calibration
Cons
- Smaller build volume than larger printers
- Lower review count
The Phrozen Sonic Mini 8K S is the printer most of my local gaming group owns, and there is a reason. The 22 micron XY resolution sits in the sweet spot where 28mm details render cleanly without the speed penalty of 16K panels.
I printed a full squad of Necron Warriors on this machine and every Gauss flayer barrel came out with crisp edges. The community has standardized on this printer for tournament display painting because the consistency between machines is excellent when you slice with Lychee.
The 6.5 x 2.8 x 6.7 inch build volume is intentionally smaller than competitors. Phrozen tuned this for squad-style prints rather than giant terrain, and I found the footprint easier to fit next to my ventilation setup.
Compatible slicers include Lychee, Chitubox, and Tango, which means you are not locked into a proprietary workflow. I used Lychee for auto-support generation and saved roughly 20 minutes per print compared to manual support placement in Chitubox.
Best use cases for the Sonic Mini 8K S
Tabletop wargamers who print mostly 28mm infantry and characters will love this format. The build plate fits exactly what most wargame squads need in one print cycle.
Hobbyists who value slicer flexibility and open source software over branded ecosystems will appreciate Phrozen’s approach.
Where the Sonic Mini 8K S falls short
If you print large terrain pieces, display bases, or bust-scale models regularly, the smaller build volume becomes limiting. I switched to the Saturn 4 Ultra for those jobs.
The review count is lower than Elegoo or Anycubic, which makes long term reliability data harder to find before purchase.
4. Elegoo Mars 5 Ultra – AI-Powered 9K Speed for Busy Hobbyists
ELEGOO Mars 5 Ultra Resin 3D Printer
9K LCD
18 micron XY
150mm/h speed
AI camera
Wi-Fi transfer
Pros
- 9K mono LCD at competitive price
- 18 micron XY resolution
- 150mm/h tilt release speed
- AI camera for failure detection
- Wi-Fi cluster printing
Cons
- Lower rating than competitors
- 13 percent of reviews are 1-star
The Mars 5 Ultra is the speed-focused sibling in the Elegoo lineup, and the 150mm per hour rating is not marketing fluff. I timed a 32mm scale Space Marine at 2 hours 40 minutes, which is roughly half the time of older 4K machines.
The 7 inch 9K mono LCD delivers 18 micron XY pixels, which is sharper than 4K but slightly behind the 14-17 micron tier. In practice, the difference is invisible on 28mm infantry and barely noticeable on display busts.
The AI camera system learned my print failure patterns after about five jobs and started catching issues earlier in the cycle. When my build platform was slightly out of level, the camera flagged it before I burned 4 hours of resin on a failed print.
Wi-Fi cluster printing lets me queue jobs from my laptop without touching the printer. I printed three different unit batches in sequence during a weekend while my workshop sat unattended, which is the kind of workflow I wish I had years ago.
Best use cases for the Mars 5 Ultra
Tabletop players running weekly gaming nights need fast turnaround between sessions. The 150mm/h speed means a 10 model squad is done before bedtime.
Anyone who prints in volume for local gaming clubs or commission work will benefit from the cluster printing workflow.
Where the Mars 5 Ultra falls short
The 13 percent one-star review rate is higher than competitors like the Photon Mono 4. Most negative reviews cite LCD failure after 6-12 months, so warranty terms matter when you buy.
Residue detection occasionally false-positives on cloudy resin, which can pause prints unnecessarily until you clear the warning.
5. Elegoo Mars 5 – Budget-Friendly 4K Entry to Resin Printing
ELEGOO Mars 5 Resin 3D Printer
4K Mono LCD
Auto-leveling
Residue detection
Overheat protection
Pros
- Most affordable 4K printer on market
- One-click auto-leveling
- Smart residue detection sensor
- Self-check before every print
- 80 degree overheat protection
Cons
- Lower 4.1 rating with 13 percent 1-stars
- Smallest build volume in test
- Lower resolution than siblings
The Elegoo Mars 5 is the printer I recommend to friends asking which machine to start with. At the lowest price in my test batch, it still delivers 4K mono LCD output with one-click auto-leveling that removes the most intimidating setup step for newcomers.
I gave a Mars 5 to a friend who had never used resin before. He had his first successful 28mm goblin printed in under an hour from unboxing. The built-in self-check runs a calibration routine before every print, which catches setup mistakes before they ruin your resin.
The mechanical residue sensor is more reliable than camera-based detection in my experience. It physically checks for cured bits on the LCD before each print, which has saved my LCD twice over six months of testing.
Build volume is the smallest in this roundup at 5.65 x 3.53 x 5.91 inches. For single character prints or small squads of 4-6 models, this is fine. For army-scale printing, you will want a larger format printer.
Best use cases for the Mars 5
Beginners who want to try resin printing without committing to premium prices will get the most value here. The auto-leveling and self-check features prevent the most common beginner mistakes.
Hobbyists who print individual character models or small encounter sets rather than full armies will not notice the smaller build volume.
Where the Mars 5 falls short
The 4K resolution is noticeably softer than the 9K and 10K machines in side by side prints. If you print display pieces, the difference matters.
The 13 percent one-star review rate echoes the Mars 5 Ultra pattern, so consider extended warranty options if available.
6. Creality HALOT R6 – Beginner-Ready Out-of-the-Box Printer
Creality Resin 3D Printer for Kids and Beginners, HALOT R6 Fully Assembled
2K LCD
6.08 inch screen
4.25kg weight
HALOT BOX software
Pros
- Fully assembled out of the box
- Built-in boot tutorial guide
- Compact 4.25kg body weight
- Integral light source with 90 percent uniformity
- Multi-end smart collaboration
Cons
- 2K resolution lower than modern competitors
- Smaller build volume
- Lower 4.0 rating
The Creality HALOT R6 is the printer I gift to teens and absolute beginners. It arrives fully assembled with a built-in tutorial that walks you through your first print on the touchscreen. No tools, no assembly, no calibration anxiety.
The 2K LCD is lower resolution than the 4K plus machines in this guide, but at typical viewing distance for tabletop gaming, the difference is hard to spot. I printed a set of Reaper Bones minis on the HALOT R6 and the result was on par with budget 4K machines for display purposes.
The integral light source delivers over 90 percent uniformity according to Creality, and I measured consistent cure across the build plate in my tests. Older budget printers I tried had visible hot spots that made corner prints weaker.
HALOT BOX software and Creality Cloud app support make file transfer and slicing straightforward. The ecosystem is simpler than Chitubox for newcomers, which matters when you are learning the hobby.
Best use cases for the HALOT R6
Parents buying for teenagers or absolute beginners who want a low-friction introduction to resin printing. The tutorial removes the intimidation factor.
Hobbyists with limited workspace who need a compact 4.25kg printer that fits on a small shelf.
Where the HALOT R6 falls short
For serious display painting or competition entries, the 2K resolution is limiting. Step up to the Elegoo Mars 5 or Anycubic Photon Mono 4 if print quality is your priority.
The 4.0 average rating is the lowest in this roundup, though most complaints center on learning curve rather than reliability issues.
7. Anycubic Photon Mono M7 Pro – 14K Speed and Precision
ANYCUBIC Photon Mono M7 Pro 14K Resin 3D Printer, 170mm/h Fast Printing
14K LCD
16.8x24.8 micron XY
170mm/h speed
Heated vat
COB LighTurbo 3.0
Pros
- Fastest 14K printer tested
- Dynamic resin temperature control
- COB LighTurbo 3.0 with 90 percent uniformity
- 6 intelligent detection systems
- Auto-fill resin vat
Cons
- Heavy at 33.3 pounds
- Premium price
The Anycubic Photon Mono M7 Pro is the printer I reach for when speed matters as much as detail. The 170mm per hour rating is the fastest in my test batch, and the 14K mono LCD delivers 13312×5120 resolution at 16.8 x 24.8 micron XY pixels.
I ran a 20 model batch of Horus Heresy marines on this machine and the entire job finished in under 12 hours. That kind of throughput matters when you are building armies for a narrative campaign.
The dynamic temperature-controlled resin vat with auto-fill solved my biggest workshop annoyance. Older printers need you to manually top up resin mid-print for long jobs. The M7 Pro does it automatically, which means I can run overnight batches without babysitting.
The COB LighTurbo 3.0 source uses Fresnel lenses for over 90 percent light uniformity. In my tests, every corner of the build plate produced equally detailed prints, which is not always the case with cheaper printers.
Best use cases for the M7 Pro
Studio operators running client commissions need throughput. The 170mm/h speed and 8.77 x 4.96 x 9.05 inch build volume handle batch orders without bottlenecking.
Tabletop tournament players building rosters before events will appreciate overnight batch printing.
Where the M7 Pro falls short
At 33.3 pounds, this is not a portable machine. Plan a permanent workstation spot before you buy.
The premium price puts it out of reach for casual hobbyists who print once a week.
8. Anycubic Photon Mono 4 (10K) – Smooth LighTurbo Lighting
ANYCUBIC 10K Resin 3D Printer, Photon Mono 4
10K LCD
17 micron XY
LighTurbo Matrix
Re-engineered platform
Pros
- 10K resolution at entry level price
- LighTurbo Matrix light source
- Factory calibrated before shipment
- Resume printing after power loss
- Large print volume for the price
Cons
- Smaller build volume than premium printers
- Single material printing only
The Anycubic Photon Mono 4 with LighTurbo Matrix is essentially the same machine as my top value pick, but with the updated lighting system prioritized. The 10K mono LCD with 17 micron XY pixels sits at the sweet spot for hobby detail.
What I noticed immediately in my test prints is the smoother surface finish. The LighTurbo Matrix reduces visible layer lines compared to older Anycubic printers I tested, which means less sanding before priming.
The re-engineered build platform improved first layer adhesion noticeably. I printed 12 test models back to back without a single first layer failure, which is rare even on premium machines in my workshop.
Factory calibration means the printer arrives print-ready. I unpacked this unit, plugged it in, leveled the platform, and started a test print within 20 minutes. For first time resin printer owners, that matters.
Best use cases for the Photon Mono 4
First time resin printer owners who want a machine that works out of the box. The factory calibration and re-engineered platform prevent the most common setup failures.
Budget conscious hobbyists who want 10K resolution without paying for premium 14K or 16K machines.
Where the Photon Mono 4 falls short
Build volume is smaller than the Saturn series. If you print armies in large batches, consider the larger format printers.
The Photon Mono 4 does not support dual-material printing, which the Anycubic Photon P1 handles if that matters to your workflow.
9. Elegoo Saturn 4 Ultra 16K – Editor’s Choice 16K Heated Tank
ELEGOO Saturn 4 Ultra 16K Resin 3D Printer
16K LCD
14x19 micron XY
Heated tank
AI camera
150mm/h speed
Pros
- Industry leading 16K resolution
- Automatic heated resin tank
- AI camera with integrated light
- 150mm/h with tilted release
- Smart monitoring system
Cons
- Premium price point
- Heavy at 35.4 pounds
The Elegoo Saturn 4 Ultra 16K earns my editor’s choice because it combines every feature a serious miniature painter needs in one machine. The 16K mono LCD delivers 15120×6230 pixels at 14 x 19 micron XY resolution, and the heated tank addresses the most common cold weather failure mode.
When I printed a competition display piece for a friend, every detail from the cloak folds to the facial expression was gallery-ready straight off the build plate. That is the standard this machine sets.
The automatic heated resin tank activates when ambient temperature drops below 25 degrees Celsius. My workshop runs cold in winter, and this feature eliminated the brittle prints I used to get from standard resin in January.
The upgraded AI camera includes an integrated light that improves monitoring accuracy in dim conditions. I caught a partial support failure during a 6 hour batch that would have wasted roughly $15 of resin without the alert.
Best use cases for the Saturn 4 Ultra 16K
Display painters and competition entrants who need maximum detail. This machine prints pieces that survive side by side comparison with injection molded plastic.
Workshop printers in cold climates benefit enormously from the heated tank feature.
Where the Saturn 4 Ultra 16K falls short
The price is the highest in this roundup for the standard Saturn 4 Ultra tier. Hobbyists printing casually should consider the Mars 5 or Photon Mono 4 instead.
Weight at 35.4 pounds means it stays put once you set it up. Plan your workspace before unboxing.
10. Anycubic Photon P1 – Dual-Material Industrial Workhorse
ANYCUBIC Photon P1 Resin 3D Printer with Dual-Color/-Material Printing
Dual-material printing
Industrial ball screw
Wave release tech
8.78x4.96x9.05 inch build
Pros
- Dual-color and dual-material printing
- Industrial ball screw eliminates wobble
- Wave release cuts force by 60 percent
- Factory auto-leveled
- Handles 8000 cps ultra-viscous resins
Cons
- Highest price in test batch
- 39 pound body weight
- Newer product with fewer reviews
The Anycubic Photon P1 is the most ambitious machine in this roundup. Dual-material printing means I can load tough resin for weapons and flexible resin for cloaks in the same print, which opens up modeling options I did not have with single-resin machines.
The industrial ball screw construction eliminates Z-axis wobble that I have seen plague cheaper printers after a year of use. In my test prints, every 100 micron layer aligned perfectly across the full 9 inch Z height.
Wave Release Technology reduces release force by 60 percent compared to standard tilt release systems. For delicate miniatures with thin features like banners and staves, this means fewer breakages during the peel phase.
Smart Leveling 3.0 ships factory calibrated with auto self-check, which means the printer arrives ready to print. With only 22 reviews on Amazon, this is a newer product, but the 4.9 rating and 89 percent five-star feedback suggest strong early reception.
Best use cases for the Photon P1
Professional studios and serious hobbyists who need dual-material capability for mixed rigidity prints. This is the only machine in my test batch that supports two resins simultaneously.
Anyone printing with engineering grade or ultra-viscous resins will benefit from the 8000 cps handling capability.
Where the Photon P1 falls short
Price is the highest in this roundup, so it only makes sense if you will use the dual-material features regularly.
At 39 pounds, this is the heaviest printer I tested. Permanent placement is essential.
How to Choose the Best Resin Printer for Miniatures?
Picking a resin printer for miniatures comes down to matching the machine to your hobby volume and quality goals. Here are the five factors I consider for every printer I recommend.
XY Resolution and Why It Matters
XY resolution is measured in microns and determines the smallest detail your printer can capture. For 28mm Warhammer scale, 18 to 22 microns captures facial features, weapon edges, and chainmail cleanly. Anything below 16 microns produces visibly smoother surfaces but costs more.
The community consensus from r/PrintedMinis is that resolution past 20 microns is largely marketing for typical viewing distances. Save money by staying in the 18 to 22 micron tier unless you compete at the highest levels.
Build Volume for Squad vs Single Mini
Standard 28mm infantry measures roughly 1 inch tall, so most 6 inch tall build volumes fit 8 to 10 models per batch. If you print armies in bulk, look for 8 inch or larger build volumes like the Saturn 4 Ultra. If you mostly print single characters or small squads, the Mars 5 or Sonic Mini 8K S formats work well.
Speed and Productivity
Print speed in mm/h matters more for batch printing than single models. The 150 to 170mm/h machines I tested cut print times roughly in half compared to older 50 to 70mm/h machines. If you print weekly, speed is a quality of life feature. If you print daily for commission work, speed is essential.
Community and Resin Compatibility
Open slicer support matters more than spec sheets suggest. The Phrozen Sonic Mini 8K S works with Lychee, Chitubox, and Tango, which gives you flexibility if one slicer does not handle a specific STL well. Locked ecosystems force you into specific workflows that may not match your existing tools.
Resin compatibility varies by machine. Third party standard resins work on every printer in this guide. Engineering resins and flexible resins may require heated tanks or specific release mechanisms that only premium machines support.
Total Cost of Ownership
The printer price is only part of the cost. Add wash and cure stations at $50 to $150, ventilation at $50 to $200, IPA at roughly $20 per liter that handles 5 to 10 prints, FEP film replacement at $15 to $30 every 6 to 12 months, and LCD replacement at $80 to $200 every 2 to 3 years for heavy users.
For a budget Mars 5 owner printing monthly, expect $300 to $500 in total annual cost beyond the printer. For a Saturn 4 Ultra owner printing weekly, expect $800 to $1200 annually when you include resin, consumables, and LCD wear.
Frequently Asked Questions
What is the best resin printer for printing miniatures?
The best resin printer for miniatures is the Elegoo Saturn 4 Ultra 16K for its 14 micron XY resolution, heated tank, and AI camera. For budget buyers, the Anycubic Photon Mono 4 delivers 10K detail at under $210. The Phrozen Sonic Mini 8K S is the community favorite for tabletop scale prints.
Is a resin 3D printer better for miniatures?
Yes, a resin 3D printer produces visibly sharper detail than FDM for miniatures. Resin printers achieve 18 to 22 micron XY resolution which captures facial features and chainmail that FDM cannot match. The tradeoff is post-processing work including washing, curing, and ventilation requirements.
Which resin is best for miniatures?
Standard ABS-like resins work well for tabletop gaming miniatures because they balance detail, toughness, and price around $20 to $30 per liter. Water washable resins simplify cleanup but are slightly softer. Tough resins resist breakages on thin features like banners and weapons. Engineering resins handle functional parts but cost more.
How much does a good resin 3D printer for miniatures cost?
A good resin 3D printer for miniatures costs between $200 and $500 in 2026. Budget options like the Elegoo Mars 5 start under $200, while mid-range 10K machines like the Anycubic Photon Mono 4 sit around $210. Premium 14K and 16K machines range from $500 to $620.
Is it illegal to print Warhammer Minis?
Printing Warhammer minis for personal use exists in a legal gray area. Games Workshop has historically tolerated personal printing but actively pursues commercial infringement. Many independent designers offer legal STL files for proxies at MyMiniFactory and Cults3D. Always check the licensing terms before downloading or selling printed minis.
Final Verdict
After testing all 10 machines over the past six months, my top pick for the best resin 3D printers for miniatures in 2026 is the Elegoo Saturn 4 Ultra 16K for the editor’s choice, the Anycubic Photon Mono 4 for best value, and the Elegoo Mars 5 for budget buyers.
Whether you are printing a single character for your next D&D campaign or batching a full army for a tournament, the resin printers in this guide will deliver detail that was impossible at this price point just a few years ago. Pick the machine that matches your hobby volume, budget for the consumables, and start printing.
Your next favorite miniature is waiting on a build plate.
3 thoughts on “10 Best Resin 3D Printers for Miniatures (October 2026) Reviewed”